While the HMB-235 V2 retains much of the character of the original, we have refined and simplified the design, reducing the weight and increasing the functionality. One of the most popular mods we saw to the 235 was a cutout in the top plate for increased camera angle, so we incorporated a relief as well as strengthening the top plate in areas that we had seen break.
Along with increased camera angles, we have noticed a trend towards smaller board cameras such as the HS1177, which we sell. We have decided to remove the standard plate camera mount and replace it with holes that work with our Universal FPV Camera Mount as well as many other case cameras. Our camera mount is available as an option with the kit for half of the normal selling price.
The main plate has both internal pockets to reduce weight, and motor pockets to allow for standard length motor screws. The center of gravity has been shifted slightly forward to allow for better balance. Curves have replaced corners to increase durability.
- Frame Weight: 150
- Materials: HDPE and G10
- Hardware: 12.9 Alloy Steel and Black Nylon
- Dimensions: 235mm diagaonally, ~191mm wide, ~137mm long, motor to motor
- Max Prop Diameter: 5″
- Motor Mounting: M3 16x19mm
- Flight Controller Mounting: 30.5×30.5mm
MultiRC are now offering a lifetime warranty on all HDPE and G10 parts on this quad. If you break the main frame, top plate, antenna bulkhead, camera plate, or rollcage, send us a pic, and we’ll send a replacement. This warranty does not cover standoffs, screws, and other hardware. Warranty only valid if parts are broken during normal use (flying). One set of replacement parts per purchase. Customer will be responsible for shipping cost